Can A Bike Fit In A Jeep Wrangler?

Jeep Wrangler owners love adventures, which is likely so, as the Wrangler is one of the best off-road cars. We all know mountain biking can be fun, and thus you might want to carry your bike in your car. So, can a bike fit in a jeep Wrangler?

It is possible to fit a bike inside a Jeep Wrangler without disassembling it. Depending on how many doors a Jeep Wrangler has, there are different ways to squeeze a bike inside, and it’s a laborious procedure.

Thus, if you are looking for ways to carry your bike in a Jeep Wrangler, this article will cover you. Make sure to read below to know everything about carrying a bike in your car.

Can you Fit a bike in your Jeep Wrangler?

You can fit your bike in the Jeep Wrangler, but it relies on a few different things. In general, moving your bike in a Jeep Wrangler can be a pain, particularly if you have a Wrangler with two doors. 

It’s because the rear seat is smaller than the one in the 4-door version. But you can still manage to pull it off.

The back seat has a lot of space; hence, even 29-inch mountain bikes may be transported without detaching the front wheel, thanks to the inside space of the four-door Jeep. 

You must follow the proper procedures if you want to put a bike into your Jeep Wrangler.

How to fit a Bike in a Jeep Wrangler

You can use a few different ways to fit your bike in a Jeep Wrangler. All these methods are well done and tested by our experts, and down below, we will discuss all of them so you can choose the best one for yourself.

1. Extend the Boot Space 

The first method you can try to fit your bike is extending the boot space in your Jeep, as it comes with quite a big boot space. 

The two-door model’s cargo capacity is 31.7 cubic feet when the back seats are folded down, whilst the four-door model’s cargo area is 72.4 cubic feet.

This space is more than enough to carry your bike in the car. However, some mountain and dirt bikes can get really big. So, fitting them in this space can be tough. But there is a remedy for that.

If you are using the four-door Wrangler, you should remove the front wheel and place the bike in the ground and secure it with bungee cords. However, for two-door models, you will need to remove both the front and rear wheels from your bike. 

Do keep in mind that if your bike is not that big, then you can even put it in the rear seat of your car without needing to extend the boot space.

2. Head Carrier

You may also carry your bike quite securely using a ceiling rack. The rack’s hook is securely fastened to the Jeep Wrangler, and the bike is fastened to the vehicle’s roof. Additionally, roof racks are extremely large, enabling you to transport three or more bikes at once.

The design of the rack may vary depending on which one you are using. Some come with hooks, some with straps, and you can even find high-end expensive ones with security lock features.

3. Use Hitch Carrier

Hitch carriers are also known as rear racks and are quite efficient in carrying bikes in your car. For bikes fit easily on a hitch bike rack mounted in your Jeep’s rear. 

Since it is secure and simple to install, it is the most popular method of transporting bikes. 

Furthermore, since the bike is on the back side of the vehicle, rear racks have no negative effects on the drive. 

Additionally, a ramp that can be lowered is included, which enables the bike to get a lifting system or be wheeled up.

4. Fork Mounts

If you wish to save money on both hitch carrier and head carrier, you can just buy some Fork mounts and bungee cords. Trunk attachable fork mounts hold your bike’s mainframe to the back of your Jeep Wrangler. 

Then, you may use bungee cords to fasten your bike’s chassis and tires. Keep in mind, though, that it is less stable than Hitch racks, and your bike has a greater possibility of swaying while you’re driving.

5. Tent Trailer

This is the last method that you can use to fit and carry your bike in Jeep Wranglers. Trailers are a great option, especially if you are going for long road tours, adventures, and camps, since you can carry a lot of things in them, including your bikes and tents. 

This option is more viable for two-door Wranglers as they have much less space than the bigger ones. 

For use with your Jeep’s attachment, you will need to buy a whole different trailer. After that, secure the trailer to the hook per the manual’s instructions. Then, fasten the bike to the trailer’s roof.

There are many different kinds of trailers, from sophisticated Overlanding trailers to straightforward cargo setups. 

Since no wheels need to be taken off and the bike is simple to retrieve once you are at your location, this will make transporting your bike much simpler.

Things to consider when you fit a bike in a Jeep Wrangler

So, when you are carrying your bike in a Jeep Wrangler, there are a few things that you must keep in mind to ensure proper driving and proper safety of your bike. Keep on reading to know more.

1. Use proper Straps or padding.

Soft straps are an excellent method to keep bikes safe from harm when traveling on a jeep wrangler. They are also extremely adaptable. 

If you cannot find straps, you may use temporary cushioning, such as comforters or sheets, which will help shield your bike from shocks and bruises.

2. Properly Tie down your bike

Always tie the bike properly, no matter what type of mounting method you use to carry your bike. If you don’t tie the bike properly, it will move a lot when driving at high speeds. There is also a high chance of the bike falling down and getting damaged.

3. Drive slowly

Do not rush to drive when you are carrying your bike in your Jeep Wrangler. Make sure to drive slowly to avoid any damage to your bike as well as your surroundings. You surely do not want your bikes to get scratched or get bumped by other cars or trees. 

4. Remove wheels 

Even if you are using a 4-door Jeep Wrangler, we recommend removing both front and rear wheels for an easy fit in your car. 

As your jeep drives, the noise that the bike produces will be significantly reduced when you remove the wheels. 

Even though it can seem like more work, you will value the peaceful and uncomplicated journey.

FAQs

In the faq section down below we will discuss all the questions that might have popped up in your head while reading this guide. Rest assured as all commonly asked questions will be answered. 

Are Bike Hitch Carriers for Jeep Wranglers Safe?

Using a bike hitch carrier to move bikes is secure. They are among the simplest and most useful methods for transporting a bike in your Jeep. 

Despite coming in a variety of shapes and sizes, each one is constructed from durable materials to fulfill its intended function.

Does a bike fit in the back of a Jeep?

Yes, a Jeep Wrangler will fit your bike. A reasonable guideline is that your bike shouldn’t be externally broader or taller than your back tire. This implies that wheels up to 2.8 inches wide will easily fit inside the Wrangler.

How much does it cost to put a trailer hitch on a Jeep Wrangler?

Depending on your trailer hitch, the process may be a little pricey. Hitch installation costs typically range from $100 to $800. 

Remember that you’ll also need to purchase the tow hitch and other components individually, which can possibly cost an additional $150 to $200.

Do bike racks damage your Jeep Wrangler?

If the bikes are not properly secured, a bike rack affixed to the trunk of your Jeep might potentially cause harm. If the bike’s front tire is mobile, it might easily scuff the paintwork when you’re driving. With time, this will undoubtedly cause dents and deteriorating paintwork.

Conclusion

Sometimes it becomes important to fit and carry your bike in your Jeep Wrangler. But, you cannot always fit the bike directly inside your car due to its size. So, to place the bike properly, you will need to follow the different methods we have discussed so far in our guide. 

Fitting the bike properly in a Wrangler can be a bit of a hassle, so you must be careful while doing it, as if you are not careful enough, you can cause damage to your car and bike. 

Make sure to follow the instructions properly, and we believe by now you already know how to fit and transport your bike without any trouble.

Related Posts:

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *