If you are a Jeep Wrangler owner, you already know it’s crucial to rotate the tire properly. However, many owners have no idea how to rotate the tires of their Jeep Wranglers. So, what is the proper procedure for the Jeep Wrangler tire rotation?
Tire rotation entails moving or rotating the Wrangler’s tires from front to back and from back to front. Using a few basic, uncomplicated procedures will allow you to rotate your tires, guaranteeing that they all wear uniformly for optimum road performance.
Thus, if you want to rotate the tires of your Jeep Wrangler and are wondering how to do it, you are in the correct place. Today we are going to discuss everything you need to know about the process.
How To Rotate Jeep Wrangler Tires?
Rotating the Jeep Wrangler is easy, and you can easily do it by following a few simple steps. Depending on the drive type of your Jeep Wrangler, the tire rotation pattern will vary. Keep on reading to learn about all these patterns.
1. Forward Cross Pattern
The first method of tire rotation is the Forward Cross pattern, also known as 5 tire rotation. This is the recommended method if your Jeep Wrangler is FWD and comes with matching spare tires. Read below to learn more.
Step 1: Jack up your car
Before starting to rotate the tires, you will need to first jack up the car for easy access to the tires. To detach the front wheels, first, jack up the very front of the car. After that, jack up the back of the car and take the back wheels off.
Step 2: Rotating the tires
After jacking up the car and removing the wheels, you will need to rotate the tires. Two front tires are switched for the two rear tires. The spare tire for the front tire on the right side will stay in place, and the back tire will take the place of the left tire from the rear. And now, you will need to put the spare tire in the rear right tire slot.
2. Rearward cross pattern
Now, if your Jeep Wrangler RWD or 4WD, then the rearward cross pattern is the correct choice for you. This is also one of the methods of the 5 tire rotation. Follow the steps below to learn how to do it.
Step 1: Jack up the car
Just like the first method, you will need to jack up the car first and remove the spare tires as well as the front and back tires. But make sure to keep track of which pair is the front and which pair is the back tire.
Step 2: Rotating the tire
The rear tires are brought toward the front, while the front tires are brought to the back. The front-to-rear tires should move from right to left and vice versa when traveling from front to back; you do not need to flip the sides they are on.
3. X Cross
The last Jeep Wrangler tire rotating method is the X cross method, and it is recommended for the FWD wrangles that don’t come with a spare tire.
Step 1: Jack up the car
Just like the previous two methods, you will need to jack up your Jeep Wrangler and remove all the wheels.
Step 2: Rotate the tires
Now you will need to rotate the tires properly. The X-cross method is the easiest one to follow. Here, in this method, you will need to switch the rear tires to the front tires. When you are swapping the tires, make sure that the position of the tires is also switched on the reverse side.
Steps to follow when rotating the tires on your Jeep Wrangler
After you have decided which tire rotation method you need to follow, you can go ahead and start with the tire opening-up procedure. By following the steps below, you can do this easily by yourself.
Step 1: Opening the wheel spacers
After you have successfully jacked up your car, it’s time to open the wheel spacers. The wheel spacers should first be removed by disassembling them with a wrench. Now remove the lug nuts and the nuts securing the wheels to the rims by using a socket wrench.
Step 2: Rotate the wheels to open them.
After you have opened the wheel spacers properly, the tires are loose now and can be removed easily. Start to rotate them clockwise, and they will start to come off slowly. Open them up, and you are ready for tire rotation.
What happens if the Jeep Wrangler tires rotation is wrong?
If you do not properly rotate the tires of your Jeep Wrangler, then there can be a few issues with your car. So, it is essential to do it properly as these negative effects can deteriorate the proper performance of your car.
Snow tires have treads that are larger, harsher, shallower, broader, and more irregularly shaped in order to grip the snowpack better. Improper tire widths when driving in winter weather might increase the danger of spinning out or skidding on slippery roads.
Cannot pump water properly
Their inability to effectively draw water underneath them on a slippery track will be one of the main problems, making them more prone to aquaplaning. Due to your inability to correctly handle the vehicle, this might significantly increase the likelihood of accidents.
More Wear and tear
Cupping can happen if your tires are not rotated often. Your tread blocks are wearing at a varying rate because of this problem, which makes your Jeep vibrate as you drive. You’ll see that the front of the block is more worn than the back, and if the condition is severe enough, no amount of spinning will make it better.
Problems you may face when rotating the jeep wrangler tires
Even though rotating the tires of your Jeep Wrangler is relatively easy of a process, you can still face some problems while doing it.
- You can easily forget which pair was the front tires and which were the rear tires; thus, rotating will be wrong.
- There is a chance of damaging the tires if you do not have the proper tools required for the work.
- If you fail to tighten the tires properly, then you run the risk of opening tires in the middle of the road leading to serious accidents.
Below, we will talk about all the Faqs related to today’s discussion. We believe this section will further clear out all your confusion.
What is the correct way to rotate tires on a 4×4?
The rearward cross pattern is suggested for cars with 4-wheel, AWD, and RWD. The front tires are shifted to the opposing sides of the rear axle, whereas the rear tires are moved onto the forward axle and retained on the same side of the car.
How do I know my Jeep Wrangler tire needs rotation?
Your Wrangler’s tires may be out of rotation or imbalanced if it begins to tremble at faster speeds, beginning at 45 mph. The tires need to be rotated if you experience vibrations throughout the vehicle. However, your tires need to be balanced if you can feel it in the steering wheel.
How often should I rotate my Jeep Wrangler tire?
Jeep wrangler tires should be rotated every 5000 to 7000 miles to maintain the tire properly and have the best performance for the car. However, failing to rotate the tires at a recommended time can cause some severe problems like traction and durability issues.
Rotating the Jeep Wrangler tire is necessary to feel the best performance of your car. However, doing it correctly can be confusing, but we believe by now you already know how to do it.
It is essential to have all the proper tools in hand before rotating the tires of your Wrangler as you can cause damage to the car as well as you without appropriate tools. Moreover, properly understand your Jeep Wrangler drive type and select the rotating technique according to that.
Another thing to make sure of is keeping all your tires separate when opening them so you can easily detect your front and rear tires.