How To Increase Towing Capacity Jeep Wrangler?

Whether you’re going on a tour with your caravan or transporting horses, you are sometimes in want of increasing the towing capacity of your vehicle. Then surely the Jeep Wrangler is up to the challenge! So, now you must be wondering how to increase towing capacity Jeep Wrangler.

To increase the towing ability of your Jeep Wrangler, you can upgrade your jeep with a heavy-duty hitch or weight-distributing hitch, moreover, upgrade the suspensions. Apart from it, there are many more ways that you would like to know to upgrade the towing level on your jeep.

Besides, by taking the time to research, we have gathered all the basics & essentials of enhancing the towing capability of the Jeep Wrangler. So, let’s get started.

Factors That Affect Towing Capacity Of Towing Capacity Jeep Wrangler

No wonder that for good reason, you may want to enhance the towing ability of your Wrangler.

But before delving into the towing capacity increasing ways, let’s take a look at what’s the factor which affects the Jeep Wrangler’s towing ability:

1. Transmission cooler

While towing in the automatic transmission, the transmission runs at full speed. As a result of the great speed, the automatic transmission fluid gets overheated.

In this case, the transmission cooler can maintain the temperature of the transmission fluid at an optimum level during the time of heavy trailer towing.

2. Sway control & weight distribution

Sway control & the distribution of the Jeep Wrangler’s weight are also important factors that affect its towing capacity.

Sway control allows the Jeep Wrangler trailer to stand against the strong wind of the gust.

Besides, a better kind of hitch is capable of maintaining the highest jeep towing & helps to maintain the stable motion of the jeep.

3. Brake controller

In the capacity of towing of the Jeep Wrangler, the vehicle brake & the brake controller matter a lot. Jeep Wrangler brakes must be good in condition for a successful towing process & must be stopped while you brake the jeep.

While towing the trailer with your jeep, if you are using an electric brake, you may need a controller.

The signal of the controller co-exists with the termination signal from your Jeep Wrangler which helps to slow down the vehicle & the trailer at the same speed.

4. Tire size

The tire size of the Jeep Wrangler also has a great effect on the capacity of towing. It’ll be noticeable that the greater the tire size you have, the less pulling power you will gain on your jeep.

The acceleration & the ability of the braking will also decrease as well as the Jeep Wrangler’s fuel economy due to the fact.

5. Engine

Engine horsepower and torque of the engine is noticeable affecting features on the Jeep Wrangler’s towing capacity.

Whether you have a two-door Jeep Wrangler or a four-door Jeep Wrangler, the engine will affect its towing capability. Look at the comparison just to get to the difference.

Models	Engine Of The Jeep Wrangler With Max Gross Trailer Weight
	2.0L	3.6L	3.0L Diesel
Two Door	2000 lb	2000 lb
Four-Door	3500lb	3500lb	3500lb

How To Increase Towing Capacity Jeep Wrangler?

When the matter comes to the capacity of towing the Jeep Wrangler, it’s pretty impressive. The Jeep Wrangler can tow a maximum of 3500 lb according to the models.

But if you still want to haul more load for towing, here are some pretty simple methods to do so. Take a look-

1. Upgrading With A Heavy-Duty Hitch

On your Jeep Wrangler, you can haul as much as the hitch can hold no matter the towing ability.

So, to increase the capability to tow your Jeep Wrangler, you can have a heavy-duty hitch installed. Because a high-quality hitch is designed to the shock absorber happens due to the heavy load.

2. Installing A Weight Distribution Hitch

Installing a weight distribution hitch is another option for increasing the capability to tow the Jeep Wrangler.

This type of hitch can help your Jeep Wrangler weight to distribute evenly making the towing easier & safer. But installing the weight distribution hitch can be cost-effective.

3. Upgrading The Suspensions & Axles

By upgrading the suspensions on your Jeep Wrangler, you can improve its towing capacity.

It’ll help to distribute the trailer weight of the Jeep Wrangler evenly in all axles, bringing more weight to the front of the jeep.

It’ll make your wrangler balanced while driving. You can also replace the axles to upgrade the jeep’s towing ability.

4. Increase The Weight Of Your Wrangler

Another way to increase the capacity of your Wrangler towing is to increase its weight. The Jeep Wrangler is lighter than the weight it determines to carry.

So, placing the sandbags or the gym weights on the axles can assist effectively to increase the Jeep Wrangler’s towing capacity.

5. Installing An Aftermarket Transmission Cooler

As you already know, towing heavy loads will increase the heat of the transmission or the engine of the Jeep Wrangler.

So, by installing the transmission cooler, you can assist your jeep to increase its towing capacity as it can absorb the heat produced while towing.

6. Upgrading The Tires

A higher-capacity tire is always an effective way to expand the jeep’s towing capacity.

Because the higher the load capacity of the tire, the better the towing process as it can handle the load swiftly of your vehicle.

7. Upgrading The Brakes

Brakes are one of the crucial parts when it comes to the towing ability of the Jeep Wrangler.

It has no value how much load your wrangler carries if it can’t stop after pressing on the brake when the time & situation comes.

So, to increase the ability of your wrangler towing, upgrade your jeep with high-quality, highly maintained brakes.

Limitations When Increasing The Towing Capacity Of A Jeep Wrangler

Now at this point, where you know how to enhance the capacity of towing the Jeep Wrangler, better you should also know that there is also a limit to increasing towing capacity.

To be more exact, if you’re towing above the towing capacity exceeding your respective license, then you are likely breaking the law.

In case you are towing over 26000 pounds of Gross Vehicle Weight Rating or GVWR & the trailer weighs more than 10,000 pounds, then you’re likely to break the law because it’s illegal. In this case, you require a Commercial Driver’s License or CDL.

On the contrary, if you are upgrading the towing capability without exceeding your license restraint, then it’s not breaking the law.

In your vehicle or jeep, if the GVWR is 26000 pounds & the trailer weighs not more than 10,000 pounds, then you don’t require any Commercial Driver’s License or CDL. Here, you can use your standard driver’s license for towing.

Other Considerations When Towing With A Jeep Wrangler

The Jeep Wrangler & its models serve you best for towing. While towing with a Jeep Wrangler, several factors you need to consider to make the process successful & safe. However, here are some for you to have a glimpse of.

1. Consider the Recommended Limitations

The first thing you need to consider while Jeep Wrangler towing is to know the optimum capacity of it. You should haul up the trailer according to the manufacturer’s recommendations.

Exceeding the trailer loading can make it difficult to handle, including braking efficiency & severe damage to your suspension or drivetrain. So, better to keep this in mind when you are towing with your wrangler.

2. Distribute the Weight Properly

When you are towing with your Jeep Wrangler, the proper weight distribution of the load is essential.

Ensure to distribute the weight of the load evenly on the right & left sides of the trailer.

3. Inspect the Tires Before Moving

Before moving for towing on your Jeep Wrangler, check the conditions of your tires.

Inspect the tire rating for your trailer & tow vehicle. You should never exceed the speed limit while on the road. Also, ensure the bearing of the trailer hub is properly greased & in well condition.

4. Light Your Way Properly

The matter seems to be negligible but it’s also an important factor for towing with your Jeep Wrangler.

Check the condition of your lights before starting your journey. Because if your lights are not properly illuminated, collisions may occur especially at night.

5. Examine the Brakes

Inspect whether the brakes are working fine for prompt action. Moreover, ensure the emergency breakaway cable is properly connected to the tow vehicle.

Anyhow, if the hitch is broken or disconnected, the cable is designed in that way that will trigger the brake for a quick halt.

6. Proper Adjustment of The Mirror

Make & examine the perfect adjustment of the mirror so that you can have a clear view & that can extend the end of the trailer.

7. Use the Right Hitch

There are factory-mounted hitches on some tow vehicles. But there are also options for you to choose a hitch while towing with your jeep.

As you know there are two types of hitches- weight carrying & weight distributing hitch. Weight carrying hitch used for 3500 pounds on less towing where the weight distributing hitch used for the heavy load.

Frequently Asked Questions [FAQs]

By now hopefully, you’ve got a clear idea about the increased towing capacity of the Jeep Wrangler. Still, there are some queries that wrangler owners often encounter. Let’s try to cover some of those.

Is it safe to tow a trailer with a Jeep Wrangler?

Yeah, it’s safe to tow a trailer with a Jeep Wrangler up to the safety limit. Usually, the Jeep Wrangler can tow a maximum of 3500 lb safely.

Can I increase the towing capacity of my Jeep Wrangler by using a weight-distributing hitch?

Yes, you can increase the Jeep Wrangler’s towing capability using a weight-distributing hitch. It helps to determine the weight in all axles evenly as a result increases the towing capacity.

Is it possible to tow a fifth-wheel trailer with a Jeep Wrangler?

It’s possible to tow a fifth-wheel trailer with a Jeep Wrangler in the condition you know the limitations & choose the right trailer. To make a successful tow of a fifth-wheel trailer with a wrangler there are certain things you need to know.

Is it safe to exceed the manufacturer’s recommended towing capacity for my Jeep Wrangler?

Despite there are many ways to expand your Jeep’s towing ability, we better recommend you not increase the capacity beyond the manufacturer’s recommendation. Because a small pound incursion of the weight can create steering problems.

Can I install a larger engine in my Jeep Wrangler to increase its towing capacity?

Legally you should not install a larger engine to increase the Jeep Wrangler’s towing capacity. Because you have got what your jeep required. Besides, there is a lot of modification that requires doing so.

Conclusion

Jeep Wrangler offers an impressive towing capacity for its users. But sometimes the situation demands an increase in the towing ability of your jeep.

For good reason, you can increase the towing ability by following the ways that we have mentioned above. But also, be enough cautious about the law more than that- your safety.

Every vehicle comes with its recommended towing ability. But if you exceed the capacity more than the upper limit, you are risking your life as well as the others.

So, whatever your need is for increasing the jeep towing capacity, first reconsider safety. Because what can be valued more than life!

Jeep Compass no throttle response

How to reset oil life on jeep grand Cherokee?

How To Increase Towing Capacity Jeep Wrangler?